Sony str k850p manual




















All modes with virtual elements were designed under the premise that the surround speaker would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle. However, if the speakers are pointing towards the listener from the immediate left and right of the listening position, the sound fields with virtual elements will not be as effective. Nevertheless, each listening environment has many variables, like wall reflections.

Therefore, we recommend that you playback multi channel surround encoded software and listen to the effect each setting has on your listening environment. Voltage: 2 V Impedance: 1 kilohms. Design and specifications are subject to change without notice. After tuning in any AM station, turn off the receiver. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz or 9 kHz , repeat the procedure.

Power consumption during standby mode. Y: 1 Vp-p, 75 ohms C: 0. Check leakage as described below. The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0. Leakage current can be measured by any one of three methods. Full screen Standard. Page of 52 Go. Performing initial setup operations. Then specify the speaker parameters size, position, etc. To check the audio output during settings to set up while outputting the sound , check the connection page



0コメント

  • 1000 / 1000