For ath0, the device designation of my adapter, I entered an ESSID, mode managed , channel number, and the hex encryption key I wanted to use. It was easier to configure ath0 as static than to deal with DHCP. Strangely, the transmit power had to be specified, which is 17dbm or 50mW for this card:. You can also use the hard drive to save configuration data.
To do either, go to the Knoppix menu, select Configure, then Save the Knoppix configuration. Check all the selections to save everything, then select which hard drive or removable media to save to. Once the operating system is loaded, go to the terminal program, type su to become root, then type ifup ath0 to activate the wireless adapter.
You can type route in the terminal window as root to verify the kernel routings if there are problems with your edits. The default Knoppix Samba config allows one to access Windows shared computers. I can't remember whether Knoppix tried to do this for you or not, and on top of that I'm not sure where it would mount them to since t's running from a CD Anyway, if you end up having to mount them manually, make sure you mount them as read-only because Linux doesn't play well with NTFS quite yet so I hear, and who am I to question it?
Jun 17, 2, 0 0. Sunner Elite Member. Oct 9, 11, 0 I don't know how you access the net, but you might have to configure the network interface. Mar 9, 4, 1 0. Fireup Shell Konsole and ping Did you set up your own internal network or you uses the address that your ISP give it to you?
Good luck! Thanks for the posts. I'm posting using Mozilla and Knoppix now. I switched to a computer using a netgear NIC and it just works. Knoppix is OK and I'm still playing around with it. Can't seem up up my screen resolution without restarting Knoppix and then don't you lose the settings anyway? You must log in or register to reply here. Post thread. CPUs and Overclocking.
Graphics Cards. Good to know you were suggesting WEP for testing only. That makes sense. Unfortunately, none of my routers support WEP. Surprising that your cards are failing for multiple routers and different linux distro. Do you have the correct password or are you able to use a non linux device to connect? Do you have MAC filtering enabled in the routers?
Logs showing nothing? Very unlikely that everything is failing and no logs to dig into. Now it is connecting for me in Linux Mint I just wish I knew why it suddenly decided to connect when it would not before. Wish I could replay to my own comment up there or edit it. There is something funny with my network. In one of your many interesting presentations, you mention you also have an AWUSH, and I hope you can help me with my connection issues for that antenna.
Once installed, I got everything apt-get update, upgrade, and dist-upgrade , and performed many of the top 20 items you recommend. However, I am unable to get my antenna to connect, even using your recommendations in your article on wireless connections.
An attempt will be made to connect this device to the best available host controller. This might result in undefined behavior for this device. From the above, you may note I also installed the script you provided to change the user name at boot-up. This is more than frustrating, and I have researched every link I can find on the subject but no cigars. You are, in so many ways, my last option for a knowledgeable answer. What should i do?
Am i supposed to be connected to the internet before I even open up a terminal through my ethernet cable. Wow this is awesome. Only it does not work for me even as the Gui tools do. Anyone else test this successfully on Kali 1. If I get time I will try it on a previous Kail release. My key and ssid are correct in the config file confirmed with a separate calculation of the key.
I did a another 3 hour blitz at this and no joy. On my Kali 1. On the Raspberry Pi, I eventually got a connection that disconnected right away but it was inconsistent. I forced the channel shown in AP config and now I consistently get connected, then disconnected with a deauth. My gut tells me that something in both cases is interfering with the manual control. On the Pi it is probably a bug as there is no gui loaded in the base Pi Kali image. I fried on this one right now…need to move to a different problem…any thoughts would be welcome.
Here is what I did for posterity:. This method is nice because it persists after reload though it really irritates me the manual way is not working for me…. Great article. Worked for Kali 2. I have a home network I use the laptop for as all my other workstations, desktops and storage are ethernet cable connected. Nice to be able to roam around with wireless now and then here. It is dead simple. It reads the known networks from a config file and scan the available networks.
Then, it connects to the first match. Following the steps closely. Running kali off an SD card and can access the network no problem in windows. Then configure static IP in Network-Manager as well. Also, depending on your Wireless Router, you might want to just enable 2. In my case the router does NOT see the device. My only access to the device is through an app on my mobile. The app should initiate the request but it does not. Since I managed once to actually see the router acknowledgment of the device and actually getting an IP; I can safely conclude that the device is NOT malfunctioning I have two of them.
Give your date of birth and then attain interesting details about your future job,. Demo training will allow you to practice forex trading with fake money so that you can see how to act before you go live.
Start by practicing Google searches all good hacktivists must learn to search. When setting up the default route where is that Many many thanks for this guide dude!!! When I try to set up the wifi by following these steps, I got this error as shown in below command failed: Operation not supported Can you please suggest? Thanks for this great tut! Thank you so much!
0コメント